KRAPOF® Slim Power Cordless Stick Vacuum Help & Tricks

Get all the details you need to set up, operate, and maintain your KRAPOF® Slim Power Cordless Stick Vacuum

How to assemble the vacuum?

  1. Attach the telescopic wand to the turbo head until it clicks into place.
  2. Next, attach the dust canister to the vacuum body until it clicks into place. Make sure it’s lined up properly at the bottom to ensure it’s easy to take apart later.
  3. Now attach the body of the vacuum to the telescopic wand.
  4. To turn it on, simply press once on the on/off button. You don’t need to hold it down, Just click once!

How to remove the dustbin?

Press down on the gold button on the top of the dust compartment. While holding down the button, pull the dust compartment to the left, then lift up to remove the dust compartment.

How to remove the filter from the dustbin?

  1. Find the lip of the Hepa filter, which is the small black part square shaped that fits into the groove of the cyclone filter and pull until the Hepa filter lifts out of the cyclone filter.
  2. Remove the black sponge from inside of the Hepa Filter.
  3. Pull the Cyclone frame upwards to remove it from inside the dust bin.
  4. Then twist the Cyclone frame from the Filter frame anticlockwise to release, then pull upwards.

How to assemble the filter inside the dust canister?

  1. Ensure that all grooves are correctly aligned when reassembling the filter into the dust bin. Incorrect alignment can cause the filter to become lodged.
  2. Verify that each groove on each side, as shown in the video, is properly aligned. Once aligned, push the filter into place.